This post may contain affiliate links. We may earn a small commission from purchases made through them, at no additional cost to you.
From shag to Persian, carpets provide a plush and warm feeling to a room, adding a whole other element. It can be hard to clean a carpet, however, as they tend to hold and attract dirt. If you get glue on a carpet, whether it be super-strength DIY glue to an industrial adhesive, that glue is there to stay. When working with adhesives, we all try to be as careful as possible, but accidents happen. That being said, the last place you wish to spill glue is on your carpet. The trick is to remove the glue as quickly as possible, as once it has dried, it can be really difficult to get the dried glue out of carpeting.
Table of Contents
- 1 What Are Adhesives Made From?
- 2 How to Remove Glue From Carpeting
- 3 Frequently Asked Questions
What Are Adhesives Made From?
There is an assortment of glue types available to buy on the market, the majority of which are synthetically manufactured. Certain adhesives, such as white craft glue, are water-based and can therefore be removed with ease by using some warm water. Superglue (also referred to as ethyl cyanoacrylate), on the other hand, is a very strong and fast-acting glue that is significantly harder to remove. Wood glue (also known as polyvinyl acetate or PVA) is also a very strong glue. Certain wood glues are also made from animal by-products which are much like gelatin.
We have put together a guide to aid you in removing the majority of glue types from your carpeting.
How to Remove Glue From Carpeting
You are now aware there are many different types of glue available, and as such, you may have to use different methods to remove specific glues from your carpets. The most important aspect when dealing with glue on your carpet is to try to remove it immediately after it has spilled so that it does not have time to dry. This may not always be possible, however, or you may have spilled an instant-drying glue such as superglue or hot glue. What follows are our recommended methods for removing different types of glue from your carpets.
How to Get Elmer’s Glue Out of Carpet
Acting quickly will decrease the hassle of removing dried wood glue from your carpet. Start by scraping off as much of the glue as you possibly can using either a spoon or a butter knife. Ensure that you do not spread the glue around when you are doing so. Then, use a dry lint-free cloth to dab at the glue, which will help in picking up any excess glue. Next, you can use warm water to dampen the cloth and dab the affected area once more. Allow the damp cloth to sit on the affected area for about 30 minutes, which should cause the glue to soften. After about half an hour has passed, you can wipe the remaining glue away.
Dish Soap or White Vinegar
White vinegar has been considered a trusted household cleaner for many years and can be very useful when trying to remove glue from your carpets. Combine warm water and distilled white vinegar at a ratio of 1:1 and apply the mixture to the area of glue on your carpet. Wipe the area until the stain is sufficiently wet. Allow the vinegar solution to soak into the area of carpeting for at least 20 minutes.
After a bit of time, the glue will begin to lift from the carpet. The glue can then be wiped away using a clean, wet cloth, after which you must allow the carpet to dry. If the glue has dried, however, it can be a lot harder to remove, although the above method should still work.
Alternatively, you can try a dish soap solution, which is made by mixing a cup of warm water with a teaspoon of dish soap.
When figuring out how to get dried glue out of carpet, you may find that using a steam iron can be useful. Before you begin steaming the area, you need to place a wet cloth over the stain. This will assist you in lifting the glue, and you can then use a warm, wet towel to wipe it away.
Best Product for Removing Elmer’s Glue From Carpeting: ELMER’S Sticky Out Adhesive Remover
What better way to get Elmer’s glue out of carpet than by using Elmer’s adhesive remover? This product works well to loosen most adhesives, from rubber cement to craft glue. You can also use this product to effectively remove crayons, stickers, oil paints, and many other sticky or goo-related cleaning problems. The solution itself is clear in color and will work quickly within just half a minute.
How to Get Wood Glue Out of Carpet
When the wood glue has dried, it can be tougher than the wood itself, thus making it hard to get wood glue out of carpeting. If the glue is still wet, you might be able to remove it by using a solution of either vinegar and water or of water and dish soap. You will require a stronger solvent once the glue has dried, however.
As a solvent, rubbing alcohol is very strong and can be highly effective in dissolving wood glue. You will first need to test it out on a part of your carpet that is out of sight before you use it to remove any dried glue. By testing it out first, you will be able to determine whether it will impact the color of the carpeting at all.
Then, using a rubbing alcohol-soaked cloth, you can begin to dab at the dried glue, aiming to loosen the glue before using a dry cloth to wipe it off. If you are struggling, we recommend leaving the rubbing alcohol-soaked cloth on top of the dried glue for roughly 15 minutes. This should result in the glue loosening, allowing you to wipe it away.
How to Remove Superglue From a Carpet
Superglue is a very useful product that can do many things, from repairing a tent to fixing a crack in the frames of your glasses. If you happen to accidentally spill some superglue onto your carpet, it will dry instantly and you will have a hard time removing the glue from your carpet.
You want to tackle any spilled glue as quickly as possible so that it does not have time to cure. You may be lucky in trying the steps above, but if you are not able to remove the superglue from the carpet with the above methods, you will have to turn to a stronger solvent.
Nail polish remover or acetone can cause the superglue to melt, but it can also damage your carpet by melting the fibers. Thus, we suggest that you test this method out on a hidden area of your carpet before you attempt to remove the superglue from your carpet.
To use this method, take an acetone-dampened cloth and dab the problem area, and then use a clean cloth to wipe the area. You may have to repeat the process with a new cloth that has been freshly dampened with acetone because the superglue will lift and transfer to the cloth from the carpet.
You can also make a cleaning solution by taking one cup of water and mixing it in one teaspoon of ammonia. Then, apply the solution to a clean cloth and dab it over the stain. The superglue should transfer onto the cloth.
How to Remove Hot Glue From Carpeting
Hot glue is a popular choice of adhesive amongst craft enthusiasts. It can, however, be quite messy to work with. If you need to remove hot glue from fabric, you can simply place the item in the freezer for roughly 20 minutes, after which time you will be able to peel the glue off carefully using your fingers. Sadly, removing your carpet from the floor and locating a freezer that is large enough can be difficult. There is another option to remove hot glue from your carpet, however, and this method makes use of a steam iron.
Hot glue bonds and dries quite fast, but applying a bit of heat can cause it to melt just as quickly. Place a piece of fabric over the spot of hot glue and then gently press the steam iron onto the affected area. The glue will then be removed from the carpet and transferred onto the fabric. You should be able to just peel the fabric away, and in doing so remove the hot glue from the carpet. You do not want to rub back and forth, however, as this could result in the glue being spread around and making it harder to remove.
Cleaning Your Carpet
The methods mentioned above will assist you in removing the glue from your carpets. Once removed, we suggest that you shampoo your carpet. This will take away any odors that may have resulted from the chemicals you had to use to remove the glue.
Accidents happen and sometimes, you may end up with glue on your carpets. Do not panic! In most cases, as we have illustrated above, you will be able to remove the glue successfully after some elbow grease. The most important step is to always try to remove the glue as fast as possible, as glue is a lot easier to remove if it is still wet. We hope that this article be of assistance should you be faced with the problem of spilled glue on your carpet!
Frequently Asked Questions
At What Point Should I Get the Assistance of a Professional Carpet Cleaner?
If the glue stain is over a large area of your carpet and you are finding it hard to remove, we suggest that you call in a professional carpet cleaner. Professional carpet cleaners have access to industrial chemicals and use a specialized machine. They will also be able to advise if the problem cannot be fixed and if your carpets need to be replaced.
Will Acetone Damage My Carpet?
Acetone is a very strong solvent that can melt polystyrene and PVC, although the nylon from which most carpets are made tends to be stable enough that it will not be impacted negatively by acetone. We suggest that you first test the acetone on an area of the carpet that is out of sight, particularly if you are unsure of what your carpet is made from.
How Do I Remove Gorilla Glue From My Carpet?
Gorilla glue is very much like wood glue, except that it is significantly stronger. Luckily, you can use acetone to remove it from your carpets. If this is not successful, you can cut the glue away from the carpet if the fibers are long enough, but this is the extreme option.
Can I Use WD-40 to Remove Superglue From My Carpet?
WD-40 is an effective option in loosening superglue from a carpet thanks to it being petroleum-based, although it can leave a stain. You can then use a stain remover or strong detergent to remove the stain created by the WD-40.