Drywall Calculator – Sheets, Screws, Mud, and Tape
Our free drywall calculator works out how many sheets of drywall you need for walls and ceilings, minus doors and windows, with an extra for cuts. Choose 4 × 8, 4 × 10, 4 × 12, or 54 inch sheets, and you also get an estimate of the screws, the joint compound, and the joint tape, plus the cost of the sheets.
How to Use the Drywall Calculator
- Choose what to cover. “Room” papers all four walls from the length, width, and wall height. “Single wall” is for one wall, and “Ceiling only” for a ceiling without walls.
- Enter the sizes. Type feet as 12, 12.5, or 12’6″. Check “Include the ceiling” if the room gets a new ceiling too.
- Count doors and windows. The calculator subtracts 21 square feet per door (3 × 7 ft) and 15 square feet per window (3 × 5 ft). Change these sizes if your openings are bigger or smaller.
- Add more rooms. Tap “Add another room, wall, or ceiling” for each part of the job.
- Pick the sheet size. Larger sheets mean fewer joints to tape, but they are heavier and harder to carry up stairs.
- Keep the extra. 10% covers cuts and a broken corner or two. Use 15% for rooms with many openings or angles.
- Copy or print. Take the list with sheets, screws, compound, and tape to the store.
How to Calculate Drywall
The calculator works with areas, the same way pros estimate:
- Wall area = (2 × length + 2 × width) × wall height
- Minus openings = number of doors × 21 sq ft + number of windows × 15 sq ft
- Ceiling area = length × width
- Sheets = area × (1 + extra) ÷ sheet area, rounded up, separately for walls and ceiling
A 4 × 8 sheet covers 32 square feet, a 4 × 10 covers 40, a 4 × 12 covers 48, and a 54 inch × 12 sheet covers 54 square feet.
Example: a 12 × 12 Bedroom With 4 × 8 Sheets
A room of 12 × 12 feet with 8 foot walls has 48 feet of wall, so 48 × 8 = 384 square feet. One door (21 sq ft) and one window (15 sq ft) leave 348 square feet. With 10% extra, that is 382.8 ÷ 32 = 11.96, so 12 sheets for the walls. The ceiling has 144 square feet, which is 158.4 ÷ 32 = 4.95, so 5 sheets. In total, you need 17 sheets of 4 × 8 drywall.
Example: the Same Room With 4 × 12 Sheets
With 4 × 12 sheets (48 square feet each), the walls need 382.8 ÷ 48 = 7.98, so 8 sheets, and the ceiling 158.4 ÷ 48 = 3.3, so 4 sheets. That is 12 sheets instead of 17, with fewer butt joints to tape. The screws stay about the same, around 520, because the number of studs and joists does not change.
Which Drywall Sheet Size Should You Use?
| Sheet size | Area | Good for |
|---|---|---|
| 4 × 8 ft | 32 sq ft | DIY, small rooms, carrying up stairs; fits 8 ft walls either way |
| 4 × 10 ft | 40 sq ft | Walls up to 10 ft high hung vertically |
| 4 × 12 ft | 48 sq ft | Long walls and ceilings, fewer butt joints |
| 54 in × 12 ft | 54 sq ft | 9 ft walls hung horizontally in two rows |
For thickness, 1/2 inch is standard on walls. Ceilings often use 1/2 inch sag-resistant board or 5/8 inch, and 5/8 inch Type X is required in fire-rated spots such as the ceiling of an attached garage below a living space (many local codes also ask for it on the garage wall). Bathrooms and basements call for moisture-resistant board. Check your local code before you buy.
How Many Screws, How Much Compound and Tape?
These estimates help you buy the supplies in one trip. They are guide values:
- Screws: USG, the maker of Sheetrock, gives a maximum screw spacing of 16 inches on walls and 12 inches on ceilings when the framing is 16 inches on center. That works out to about 28 screws per 4 × 8 sheet on walls and about 35 on ceilings. Use 1 1/4 inch coarse-thread screws for 1/2 inch board on wood studs.
- Joint compound: about 9.4 gallons per 1,000 square feet for three coats of lightweight all-purpose compound, based on the coverage USG lists for Sheetrock Plus 3. A 12 × 12 room with ceiling needs about 4.6 gallons, or two 4.5 gallon pails.
- Joint tape: the calculator adds the length of the sheet joints and the inside corners. A 12 × 12 room with ceiling needs about 265 feet with 4 × 8 sheets, which is two 250 foot rolls of paper tape.
- Corner bead: count the outside corners and the edges of window returns separately. Beads come in 8 and 10 foot lengths.
Tips for Hanging Drywall
- Ceiling first, then walls. The wall sheets then support the edges of the ceiling sheets.
- Hang walls horizontally in most rooms. The long tapered edges then meet at a comfortable working height, and there are fewer joints to finish.
- Stagger the butt joints. Joints at the ends of sheets should not line up from row to row or fall at the edge of a door frame.
- Do not sink the screws too deep. The head should sit just below the surface without tearing the paper. A dimpler bit makes this easy.
- Sand lightly between coats. Our guide on how to sand drywall shows how to get a smooth wall without gouges and with less dust.
- Prime before you paint. Fresh compound and paper soak up paint differently. Our test of the best drywall primer helps you choose.
Are you deciding between new drywall and repairing old walls? Our comparison of plaster vs. drywall explains the differences, and for small damage, how to fill screw holes in a wall may be all you need.
Privacy and Honest Limits
The drywall calculator runs entirely in your browser. There is no sign-up, and nothing you enter is sent anywhere. It counts sheets by area, which is how most estimates are made. A detailed layout on paper can come out a sheet higher or lower, especially in small rooms with many openings. Screw, compound, and tape amounts are guide values. The product labels and your local building code come first.
More Free DIY Tools
All our tools are free, run in your browser, and need no account.
- Concrete Calculator: work out cubic yards and bags of concrete for slabs, footings, and posts.
- Board Foot Calculator: turn your cut list into board feet and lumber cost.
- Paint Calculator: find out how many gallons of paint your room needs.
- Tile Calculator: count the tiles, boxes, and grout for your floor or wall.
- Wallpaper Calculator: see how many rolls of wallpaper you need.
- Square Footage Calculator: add up rooms and odd shapes in square feet and square yards.
- Gravel Calculator: find the cubic yards, tons, and bags of gravel for your project.
- Mulch Calculator: work out how many bags or yards of mulch your beds need.
- Stair Calculator: plan risers, treads, and stringers for your stairs.
Frequently Asked Questions
How Do I Calculate How Much Drywall I Need?
Add the length of all walls, multiply by the wall height, and subtract doors and windows. Add the ceiling area if needed. Divide by the area of one sheet (32 square feet for 4 × 8) and add about 10% for cuts.
How Many Sheets of Drywall for a 12 × 12 Room?
With 8 foot walls, one door, one window, and the ceiling, you need about 17 sheets of 4 × 8 or 12 sheets of 4 × 12, including 10% extra.
How Many Screws per Sheet of Drywall?
About 28 screws per 4 × 8 sheet on walls and about 35 on ceilings, with framing 16 inches on center. A 4 × 12 sheet takes about 40 on walls and 50 on ceilings.
How Much Joint Compound Do I Need?
Plan about 9 to 10 gallons of ready-mixed compound per 1,000 square feet for taping and two finish coats. A typical bedroom takes one to two 4.5 gallon pails.
Should Drywall Be Hung Horizontally or Vertically?
Most pros hang walls horizontally, because it leaves fewer and easier joints. Vertical hanging is common on tall walls and in commercial work with metal studs.
What Size Drywall Should I Use for Ceilings?
4 × 12 sheets are popular for ceilings because they cover more with fewer joints. Use 1/2 inch sag-resistant or 5/8 inch board, and hang the sheets across the joists.
Is the Drywall Calculator Free?
Yes. It is free, needs no account, works in feet or meters, and lets you copy or print the result.








