Choose your Shape

This is our most popular and most cost-effective shape. The closest alternative to this is the Arc shape (below) with an overhang. A Rectangle becomes and Arc shape if there are 2 or more corners with a 3" or greater radius. The rectangle shape has clean lines and economizes all available space. Tops that are less than 1.5" thick with 10" of overhang or greater must have support rods. Tops that are greater than 1.5" thick with 12" of overhang or greater must have support rods. If your rectangle top has 3" or greater rounded edges on the corners (e.g., "dog ears"), please use the Arc shape for your estimate.
L shaped wood islands or countertops provide larger surface area for food preparation, casual dining, or buffet style dinner service and commonly have an undermount sink in their design. Fun Fact: Our most popular wood species for L shaped counter tops is Black Walnut.
U shaped wood islands provide a tremendous amount of surface area for food preparation or casual dining and are found in larger kitchens. They almost always have an undermount sink in their design. Fun Fact: Our most popular wood species for U shaped counter tops are Black Walnut, Sapele and Maple.
An Arc is a rectangle with over 3" radius corners on at least 2 sides. This is second most popular and a very economical shape. The Arc shape has an overhang allowing easy use of the surface as a food preparation surface, dining area or conversation spot. Tops that are less than 1.5" thick with 10" of overhang or greater must have support rods. Tops that are greater than 1.5" thick with 12" of overhang or greater must have support rods.
An oval shape is ideal for larger rooms and/or barstools at the island. It is also an excellent option for upgrading top. Tops that are less than 1.5" thick with 10" of overhang or greater must have support rods. Tops that are greater than 1.5" thick with 12" of overhang or greater must have support rods.

Enter your dimensions

Choose your Material

Choose your grain direction

  • Parallel Grain Direction

    Parallel Grain Direction
    Parallel »

    This is our most popular selection. The natural grain of your wood top will run along the length of the top.

  • Perpendicular Grain Direction

    Perpendicular Grain Direction
    Perpendicular »

    The wood grain of your top will run across the width of your countertop.

Backsplash options

Edge Profile Locations

Additional Options

If you are planning on an undermount sink (which over 50% of our customers do), be sure to select the “Cut Out” option.
Add custom hand distressing to your countertop to give your project the look of having lived with your family for over 20 years. Shown: Teak Edge Grain - Distressed
Custom routed words on your countertop up to 36 square inches.
Hand Planed surfaces offer a unique look reminiscent of antique timber and is a great alternative to distressing.
One price for up to 12 maximum How about having up to 12 Knife Slots integrated into your countertop?
If your piece is greater than 2.25" thick and you are creating a Mitered Waterfall Table leg as shown here, please select this option when quoting.
If you plan on doing food preparation on your wood countertop near your sink, you may be interested in having Routed Drain Channels inserted into your top to direct water to your sink.
If your piece is less than or equal to 2.25" thick and you are adding a Mitered Waterfall Leg, select this option. This fee applies for each mitered table leg. If you have one on each side, then 2 fees apply.
Adds ultimate heat resistance to wood top -- 4 Rods Total Want to set hot pots and pans on your wood countertop with no fear? Choose to have either 3 or 6 Steel Set-Down Rods inserted into your top to have it function just like granite (they are removable, too!)
A simple, standard trash chute cut out is $250. If you would like a lid, please see trash chute and lid option or visit our stainless steel insert option as well.

CAD File Upload

  • Upload a DXF File Now

    DXF File Requirements

    • Job Name
    • File in DXF format
    • Indicate profiled sides
    • Grain direction
    • Indicate walls, profile stops, etc.
    • Locate sinks; provide sink flange in drawing (for under routing)
    • Locate stoves and downdrafts
    • Locate faucets, air switches, etc
    • Show radiused, clipped, etc, corners
    • Indicate joints (miter, butt, parallel) for multiple tops
    • Indicate overhangs if larger than 1 1/2"
  • Upload a DXF File Later

    DXF File Requirements

    • Job Name
    • File in DXF format
    • Indicate profiled sides
    • Grain direction
    • Indicate walls, profile stops, etc.
    • Locate sinks; provide sink flange in drawing (for under routing)
    • Locate stoves and downdrafts
    • Locate faucets, air switches, etc
    • Show radiused, clipped, etc, corners
    • Indicate joints (miter, butt, parallel) for multiple tops
    • Indicate overhangs if larger than 1 1/2"
  • I don't have a DXF File

    Add 50.00

    Please create a drawing using our Craft Art Drawing Form and contact us to submit it.

Enter your shipping information

Shipping Information

Do you have a loading dock?

Contact Preferences

Yes No
Yes No
Loading...